Learn how to install 3M privacy filter australia.

Installation and Care

Learn how to install, clean and care for 3M Anti Glare Film products.

Choose your device to view the appropriate privacy screen installation instructions.


Application Videos

Watch step-by-step privacy screen installation instructions and tips for attaching and cleaning 3M™ Privacy and Protection Products by device type.


Laptop Attachment Options

Some attachment parts are not included with all screen protectors.

3M™ COMPLY™ Adhesive Strips

Installation instructions

3M™ COMPLY™ Adhesive Strips

  • Bright screen privacy filter shown attached to laptop screen with four COMPLY adhesive strips
    Option A
  • Bright screen privacy filter shown attached to laptop screen with six COMPLY adhesive strips
    Option B

How to apply

  • Attaching hinges to COMPLY™ attachment bezel fit
  • Attaching COMPLY™ attachment bezel fit to laptop
  • Applying optional flip tab for  COMPLY™ attachment bezel fit
  • Remove plastic backing from COMPLY adhesive strips
  • Apply filter bottom to top with COMPLY adhesive strips facing laptop screen.

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.

1. Peel off strip from the white backing.
2. Apply strip to one edge on the back of the filter.
3. Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
4. Apply all required strips before peeling off brown liners.
5. Position the filter based on the diagram for your display type.
6. Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove
 

  • Use the notch cut-out to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

3M™ COMPLY™ Attachment - Bezel

Installation instructions

3M™ COMPLY™ Flip Attach for Raised Bezel Fit

(for laptops with a raised bezel)

The 3M™ COMPLY™ Flip Attach for Raised Bezel Fit allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for raised bezel fit.

COMPLY™ attachment - bezel fit installation illustrations

How to apply

Note: Your COMPLY attachment system comes with two hinges. Each hinge has a clear adhesive end and a black adhesive end. You will attach the clear end to your privacy filter and the black end to your laptop bezel.

  • Attaching hinges to COMPLY™ attachment bezel fit
    1. Attach hinges to your 3M anti glare film
    • Remove the liner covering the clear end of the first hinge
    • Apply the exposed adhesive to the top front side of the privacy filter, about an inch from the right edge. Be sure to align the black end of the hinge with the top of the filter
    • Repeat to apply the second hinge to the left side
  • Attaching COMPLY™ attachment bezel fit to laptop
    2. Attach privacy filter to your laptop
    • Remove the liner on the black end of the hinge
    • Place the filter within the raised bezel of your laptop, with the black end over the top bezel
    • Firmly press to adhere
  • Applying optional flip tab for  COMPLY™ attachment bezel fit
    3. Apply optional flip tab
    • This optional flip tab makes it easy to flip from world-class privacy to screen sharing without leaving fingerprints
    • Remove the liner on the 3M privacy screen sticky tab and adhere to the back side of the privacy filter on either the right or left side

How to Remove
 

  • Like peeling tape off a box, use a fingernail to peel back the edge of a COMPLY attachment. Then use your finger to roll up the adhesive. The adhesive is designed to remove cleanly after use. In the event adhesive residue remains, this can be removed using IPA or other adhesive removers, and a cleaning cloth.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

3M™ COMPLY™ Attachment - Universal

Installation instructions

3M™ COMPLY™ Flip Attach for Full Screen Universal Fit

(for laptops with flat front glass)

The 3M™ COMPLY™ Flip Attach for Full Screen Universal Fit allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for full screen universal fit.

COMPLY™ attachment - Universal fit installation illustrations

How to apply

Note: Your COMPLY attachment system comes with two hinges. Each hinge has a clear adhesive end and a printed adhesive end. You will attach the clear end to your privacy filter and the printed end to your laptop lid.

  • Attaching hinges to COMPLY™ attachment universal fit
    1. Attach hinges to your 3M anti glare film
    • Remove the liner covering the clear end of the first hinge
    • Apply the exposed adhesive to the top front side of the privacy filter, about an inch from the right edge. Be sure to align the black border on the hinge with the top of the filter
    • Repeat to apply the second hinge to the left side
  • Attaching COMPLY™ attachment universal fit to laptop
    2. Attach privacy filter to your laptop
    • Remove the liner on the printed end of the hinge and align the top of the privacy filter to the top of the active display
    • Wrap the hinges over top and around to the back of the laptop lid
    • Firmly press to adhere
  • Applying optional flip tab for  COMPLY™ attachment universal fit
    3. Apply optional flip tab
    • This optional flip tab makes it easy to flip from world-class privacy to screen sharing without leaving fingerprints
    • Remove the liner on the 3M privacy screen sticky tab and adhere to the back side of the privacy screen protector on either the right or left side

How to Remove
 

  • Like peeling tape off a box, use a fingernail to peel back the edge of a COMPLY attachment. Then use your finger to roll up the adhesive. The adhesive is designed to remove cleanly after use. In the event adhesive residue remains, this can be removed using IPA or other adhesive removers, and a cleaning cloth.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

3M™ COMPLY™ Attachment - Custom

Installation instructions

3M™ COMPLY™ Flip Attach for Custom Fit

(for laptops with flat front glass)

The 3M™ COMPLY™ Flip Attach for Custom Fit allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for custom fit.

COMPLY™ attachment - Custom fit installation illustrations

How to apply

Note: Your COMPLY attachment system comes with two hinges. Each hinge has a clear adhesive end and a printed adhesive end. You will attach the clear end to your privacy filter and the printed end to your laptop lid.

  • Attaching hinges to COMPLY™ attachment custom fit
    1. Attach hinges to your 3M anti glare film
    • Remove the liner covering the clear end of the first hinge
    • Apply the exposed adhesive to the top front side of the privacy filter, about an inch from the right edge. Be sure to align the black border on the hinge with the top of the filter
    • Repeat to apply the second hinge to the left side
  • Attaching COMPLY™ attachment custom fit to laptop
    2. Attach privacy filter to your laptop
    • Remove the liner on the printed end of the hinge and align the top of the privacy filter to the top of the laptop screen
    • Wrap the hinges over top and around to the back of the laptop lid
    • Firmly press to adhere
  • Applying optional flip tab for  COMPLY™ attachment custom fit
    3. Apply optional flip tab
    • This optional flip tab makes it easy to flip from world-class privacy to screen sharing without leaving fingerprints
    • Remove the liner on the 3M privacy screen sticky tab and adhere to the back side of the privacy screen protector on either the right or left side

How to Remove
 

  • Like peeling tape off a box, use a fingernail to peel back the edge of a COMPLY attachment. Then use your finger to roll up the adhesive. The adhesive is designed to remove cleanly after use. In the event adhesive residue remains, this can be removed using IPA or other adhesive removers, and a cleaning cloth.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

3M™ COMPLY™ Attachment - for MacBook computers

Installation instructions

3M™ COMPLY™ Flip Attach for MacBook Computers

(for laptops with flat front glass)

The 3M™ COMPLY™ Flip Attach for MacBook Computers allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for MacBook computers.

COMPLY™ attachment - Macbook installation illustrations

How to apply

Note: Your COMPLY attachment system comes with two hinges. Each hinge has a clear adhesive end and a printed adhesive end. You will attach the clear end to your privacy filter and the printed end to your laptop lid.

  • Attaching hinges to COMPLY™ attachment system for Macbook
    1. Attach hinges to your 3m anti glare film
    • Remove the liner covering the clear end of the first hinge
    • Apply the exposed adhesive to the top front side of the privacy filter, about an inch from the right edge. Be sure to align the black border on the hinge with the top of the filter
    • Repeat to apply the second hinge to the left side
  • Attaching COMPLY™ attachment to Macbook
    2. Attach privacy filter to your laptop
    • Remove the liner on the printed end of the hinge and align the top of the privacy filter to the top of the laptop screen
    • Wrap the hinges over top and around to the back of the laptop lid
    • Firmly press to adhere
  • Applying optional flip tab for  COMPLY™ attachment to Macbook
    3. Apply optional flip tab
    • This optional flip tab makes it easy to flip from world-class privacy to screen sharing without leaving fingerprints
    • Remove the liner on the 3m privacy screen sticky tab and adhere to the back side of the privacy screen protector on either the right or left side

How to Remove
 

  • Like peeling tape off a box, use a fingernail to peel back the edge of a COMPLY attachment. Then use your finger to roll up the adhesive. The adhesive is designed to remove cleanly after use. In the event adhesive residue remains, this can be removed using IPA or other adhesive removers, and a cleaning cloth.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

Slide Mount Tabs

Description

Slide mount tabs attach onto the device bezel bordering your display and stay in place, allowing you to slide the filter on and off the screen as needed.

How to Apply

  • Illustration of slide mount tabs
  • Illustration showing how to peel slide mount tabs
  • Illustration of slide mount tabs positioned and adhered to bezel around computer screen
  • Illustration showing how to attach privacy filter to screen by using slide mount tabs
  • Illustration showing how to attach privacy filter to screen by using slide mount tabs

Note: Depending on display size, you may not need to use all slide mount tabs provided.


  • Separate slide mount tabs by size, starting with two large tabs for the base.
  • Peel off liner to reveal the adhesive.
  • Position large tabs on bottom corners so the adhesive attaches onto the device bezel and the tab edges hang over the screen.
  • Position small tabs on the sides so the adhesive attaches onto the device bezel and the tab edges hang over the screen.
  • Slide filter into place.
  • Optional: Place additional tabs on the device bezel above the filter to lock it into place.

How to Remove


  • For permanent removal or to replace slide mount tabs, grab onto the non-adhesive tab and slowly peel.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
Attachment Strips

Description

Ideal for displays with edge-to-edge glass, optically clear attachment strips are applied directly onto the filter before attaching to the device screen. Washable and removable, attachment strips allow for easy filter removal, cleaning and reattachment.

  • Illustration of attachment strips on a privacy filter for laptops
  • Illustration of attachment strips on a privacy filter for touchscreen devices and tablets
  • Illustration of attachment strips on a privacy filter for monitors

How to Apply


  • Illustration of attachment strips
  • Illustration of attachment strip lining up to edge of privacy filter
  • Illustration of attachment strip applying to privacy filter by pressing
  • Illustration showing how to remove liners from attachment strips after application
  • Illustration of a privacy filter attaching to screen by attachment strips

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.


  1. Peel off strip from the clear backing.
  2. Apply strip to one edge on the back of the filter.
  3. Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
  4. Apply all required strips before peeling off blue liners.
  5. Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove


  • Use the thumb notch to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
  • Clean attachment strips by running them under water and rubbing with your finger. Let dry before reattaching to display.
CSS ID

Monitor Attachment Options

Some attachment parts are not included with all filters.

3M™ COMPLY™ Magnetic Attach for Monitors tab

Installation instructions

3M™ COMPLY™ Magnetic Attach for Monitors

The 3M™ COMPLY™ Attach for Monitors allows you to quickly and easily switch from world-class privacy to screen sharing.


COMPLY™ Magnetic Attach for Monitors Installation instructions

How to Apply

  • 3M™ COMPLY™ Magnetic Attach for Monitors installation step 1
  • 3M™ COMPLY™ Magnetic Attach for Monitors installation step 2
  • 3M™ COMPLY™ Magnetic Attach for Monitors installation step 3
  • 3M™ COMPLY™ Magnetic Attach for Monitors installation step 4
  • 3M™ COMPLY™ Magnetic Attach for Monitors installation step 5
  • 3M™ COMPLY™ Magnetic Attach for Monitors installation step 6

 WARNING:

*To reduce the risks associated with magnets and implanted medical device interference which, if not avoided, could result in serious injury or death: magnetic attachment bracket contains high strength magnets. Keep away from implanted medical devices to help prevent interference, as medical devices such as implanted pacemakers and defibrillators might contain sensors that respond to magnets when in close contact. Consult your medical professional for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and the magnetic attachment.


Hanger Arms

Description

Hanger arms snap onto 3M™ Framed Privacy Filters and then rest on the top of a monitor, allowing for easy removal, cleaning and reattachment.

How to Apply

  • Illustration showing how to attach a hanger arm to the top of a framed privacy filter
  • Illustration of a hanger arm clipped onto a framed privacy filter
  • Illustration of a hanger arm sliding across the top of a framed privacy filter
  • Illustration showing how to attach a framed privacy filter to monitor screen by the hanger arms
  • Illustration of a monitor attached with a framed privacy filter

Note: The red dot indicates the front of the filter.


  • Clip hanger arms onto filter with arms extending back toward the monitor.
  • Hanger arms are secured if you can slide them from side to side.
  • Hold filter by the sides of the frame when removing or reapplying.
  • Allow hanger arms to rest on top of the monitor.

Tips for Optimizing Use


  • To raise the filter height, apply foam pads enclosed in your package.
  • Some 3M™ Framed Privacy Filter models allow you to replace hanger arms with easy-on, easy-off Command™ Strips.
  • Remove filter from device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
Command™ Strips

Description

Command™ Strips connect together when attached to both the front of your monitor frame and the back of a 3M™ Framed Privacy Filter. Offers a secure solution while allowing for easy removal, cleaning and reattachment.

How to Apply

  • Illustration of Command Strips
  • Illustration of Command Strips attached to back of a framed privacy filter
  • Illustration showing how to apply framed privacy filter to monitor screen by Command Strips

Note: The red dot indicates the front of the filter (Side A)


  • Separate Command™ Strips and connect them by folding in half, pressing firmly until they snap together.
  • Peel off liner from one side of the connected strips. Attach to the back of the filter frame with the rounded tab facing the outside edge.
  • Press firmly and repeat on all four corners.
  • Remove remaining liners and bring filter to monitor, lining it up so the strips attach to the bezel (frame) and not the screen. Press firmly.

How to Remove

  • Illustration showing how to remove framed privacy filter from monitor screen
  • Illustration showing how to reattach framed privacy filter to monitor screen
  • Gently pull the filter away from the monitor edges to disconnect the Command™ Strips from each other.
  • Reattach the filter to the monitor by lining up the Command™ Strips in each corner. Press firmly to connect.
  • Illustration showing how to remove framed privacy filter from monitor screen
  • Illustration showing how to slowly remove Command Strips
  • For permanent Command™ Strip removal, detach the filter from the monitor and use the rounded tabs to slowly stretch the strips until the adhesive releases (as shown).

Tips for Optimizing Use


  • Some 3M™ Framed Privacy Filter models allow you to replace hanger arms with easy-on, easy-off Command™ Strips.
  • Remove filter from device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
Attachment Strips

Description

Ideal for displays with edge-to-edge glass, optically clear attachment strips are applied directly onto the filter before attaching to the device screen. Washable and removable, 3M adhesive strips for privacy screen allow for easy screen protector removal, cleaning and reattachment.

  • Illustration of attachment strips on a privacy filter for laptops
  • Illustration of attachment strips on a privacy filter for touchscreen devices and tablets
  • Illustration of attachment strips on a privacy filter for monitors

How to Apply


  • Illustration of attachment strips
  • Illustration of attachment strip lining up to edge of privacy filter
  • Illustration of attachment strip applying to privacy filter by pressing
  • Illustration showing how to remove liners from attachment strips after application
  • Illustration of a privacy filter attaching to screen by attachment strips

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.


  • Peel off strip from the clear backing.
  • Apply strip to one edge on the back of the filter.
  • Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
  • Apply all required strips before peeling off blue liners.
  • Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove


  • Use the thumb notch to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
  • Easily clean 3M adhesive strips for privacy screen. Run them under water and rubbing with your finger. Let dry before reattaching to display.
Slide Mount Tabs

Description

Slide mount tabs attach onto the device bezel bordering your display and stay in place, allowing you to slide the filter on and off the screen as needed.

How to Apply

  • Illustration of slide mount tabs
  • Illustration showing how to peel slide mount tabs
  • Illustration of slide mount tabs positioned and adhered to bezel around computer screen
  • Illustration showing how to attach privacy filter to screen by using slide mount tabs
  • Illustration showing how to attach privacy filter to screen by using slide mount tabs

Note: Depending on display size, you may not need to use all slide mount tabs provided.


  • Separate slide mount tabs by size, starting with two large tabs for the base.
  • Peel off liner to reveal the adhesive.
  • Position large tabs on bottom corners so the adhesive attaches onto the device bezel and the tab edges hang over the screen.
  • Position small tabs on the sides so the adhesive attaches onto the device bezel and the tab edges hang over the screen.
  • Slide filter into place.
  • Optional: Place additional tabs on the device bezel above the filter to lock it into place.

How to Remove


  • For permanent removal or to replace slide mount tabs, grab onto the non-adhesive tab and slowly peel.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

Tablet Attachment Options

Some attachment parts are not included with all filters and screen protectors.

Attachment Strips

Description

Ideal for displays with edge-to-edge glass, optically clear attachment strips are applied directly onto the screen protector before attaching to the device screen. Washable and removable, 3M adhesive strips for privacy screen allow for easy filter removal, cleaning and reattachment.

  • Illustration of attachment strips on a privacy filter for laptops
  • Illustration of attachment strips on a privacy filter for touchscreen devices and tablets
  • Illustration of attachment strips on a privacy filter for monitors

How to Apply

  • Illustration of attachment strips
  • Illustration of attachment strip lining up to edge of privacy filter
  • Illustration of attachment strip applying to privacy filter by pressing
  • Illustration showing how to remove liners from attachment strips after application
  • Illustration of a privacy filter attaching to screen by attachment strips

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.


  1. Peel off strip from the clear backing.
  2. Apply strip to one edge on the back of the filter.
  3. Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
  4. Apply all required strips before peeling off blue liners.
  5. Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove


  • Use the thumb notch to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
  • Clean attachment strips by running them under water and rubbing with your finger. Let dry before reattaching to display.
Adhesive-Backed

Description

A screen protector applies directly to your device screen with a residue-free adhesive that removes cleanly. Stay-clean edge technology helps keep edges free from dust and grime.

How to Apply

  • Illustration showing how to wipe tablet screen with microfiber cloth
  • Illustration of peeling back screen protector at edge
  • Illustration showing how to slowly apply screen protector to tablet
  • Illustration of applicator pressing down to attach screen protector to device
  • Illustration of applicator pushing air bubbles out to edge of screen protector
  • Illustration showing how to clean privacy screen protector

Note: Turn off device and remove from case before applying screen protector.


  1. Gently clean your screen with a microfiber cloth.
  2. Begin by slowly peeling back the liner.
  3. Carefully line the screen protector up to device edges before applying.
  4. While slowly removing liner, bend the screen protector back and firmly flatten it onto the screen. Tip: If you notice debris under the screen protector, slowly lift it back up and remove the dust particle. Use a piece of tape if needed.
  5. Use the applicator to push any air bubbles out to the edges.
  6. Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.

How to Remove


  • For permanent removal, use your fingernail to lift a corner of the screen protector and slowly peel it off the device screen.
  • Use a soft, lint-free cloth to easily remove any remaining residue.

Tips for Optimizing Use


  • Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.

Smartphone Attachment Options

Some attachment parts are not included with all screen protectors.

Adhesive-Backed

Description

A screen protector applies directly to your device screen with a residue-free adhesive that removes cleanly. Stay-clean edge technology helps keep edges free from dust and grime.

How to Apply

  • Illustration showing how to wipe smartphone screen with microfiber cloth
  • Illustration of peeling back screen protector at edge
  • Illustration showing how to slowly apply screen protector to smartphone
  • Illustration of applicator pressing down to attach screen protector to device
  • Illustration of applicator pushing air bubbles out to edge of screen protector
  • Illustration showing how to clean privacy screen protector

Note: Turn off device and remove from its case before applying.


  1. Gently clean your screen with a microfiber cloth.
  2. Begin by slowly peeling back the liner.
  3. Carefully line the screen protector up to device edges before applying.
  4. While slowly removing liner, bend the screen protector back and firmly flatten it onto the screen. Tip: If you notice debris under the screen protector, slowly lift it back up and remove the dust particle. Use a piece of tape if needed.
  5. Use the applicator to push any air bubbles out to the edges.
  6. Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.

How to Remove


  • For permanent removal, use your fingernail to lift a corner of the screen protector and slowly peel it off the device screen.
  • Use a soft, lint-free cloth to easily remove any remaining residue.

Tips for Optimizing Use


  • Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.