34
3M
TM
Acryl-Red Glazing Putty
A general purpose, single component putty. Fills small pinholes
and scratches. Spreads and sands easily, dries fast, has minimum
shrinkage and excellent adhesion. 3M Acryl-Red Glazing Putty
minimises loading and feathers out to a smooth finish.
Part No.
Description
Size
5098
3M Acryl-Red Glazing Putty
410g
3M
TM
Fillers, Glazes & Putties
3M
TM
Piranha
TM
Advanced Finishing Glaze
Putties and glazes use smaller filler particle size so they can be spread thinner.
This gives better feathering characteristics – less of an edge where the putty
finishes – and can be used to fill fine scratches and stone chips. Putties and glazes
are usually made from a different base resin and are designed to be thinner (less
viscous) than fillers, meaning they flow more easily and are self levelling.
A two part, self levelling, tan coloured, polyester based, flowable putty used
as a “skin coat” to fill minor imperfections in properly prepared body filler,
steel, aluminium, SMC, fibreglass and OEM paint.
Glazes and Putties
Part No.
Description
Size
5821
3M Piranha Advanced
Finishing Glaze
710ml
3M
TM
Flowable Finishing Glaze
A two component, tan coloured, stain free, tack free, flowable
polyester material, slightly heavier than Piranha Advanced Finishing
Glaze designed for the filling of pinholes, minor dents, gouges, scratches
and stone chips in properly prepared body filler, steel, aluminium, SMC,
fibreglass and OEM paint.
Part No.
Description
Size
5824
3M Flowable Finishing Glaze
710ml
