1. Australia
  2. All 3M Products
  3. Personal Protective Equipment
  4. Fall Protection
  5. Confined Space
  6. Davit Arm Bases
  7. 3M™ DBI-SALA® Confined Space, Wall Mount Base HC Galvanized 8000101, 1 EA/Case

3M™ DBI-SALA® Confined Space, Wall Mount Base HC Galvanized 8000101, 1 EA/Case

  • 3M Product Number 8000101
  • 3M ID 70804498841

Combines with 3M™ DBI-SALA® HC Davit Mast to form a confined space rescue and work support system

Mounts onto a vertical wall mounting surface

High-strength steel construction

View more details

Details

Highlights
  • Combines with 3M™ DBI-SALA® HC Davit Mast to form a confined space rescue and work support system
  • Mounts onto a vertical wall mounting surface
  • High-strength steel construction
  • Galvanised coating provides corrosion protection
  • 360 degree davit mast rotation
  • Thermoplastic davit mast sleeve liner reduces friction and aids in davit rotation
  • Permanent installation
  • Also available in stainless steel
  • For use with all 3M™ DBI-SALA® HC Davits
  • 10 cm (4 in) mast/sleeve diameter
  • Silver
  • Meets the requirements of EN795:2012, EN1496:2006, CEN/TS 16415:2013 when used as part of a complete system
  • Replaces Manufacturer Part Number 8566191

3M™ DBI-SALA® Confined Space HC (High Capacity) Wall Mount Base is constructed of galvanised steel and is designed to be installed onto vertical wall surfaces. Integrated mounting holes accept M20 fasteners so you can secure the base into position. When used as part of our complete system, this base meets the requirements of EN795:2012, EN1496:2006, CEN/TS 16415: 2013, and AS/NZS 5532.

For a wall mount base (galvanised steel) for use with 3M™ DBI SALA® HC Davit Mast in the formation of a confined space rescue and work support system, use 3M™ DBI SALA® Confined Space HC (High Capacity) Wall Mount Base. Our wall mount base is constructed of mild steel, and coated using a hot dipped galvanization process which provides corrosion protection against the elements and is silver in appearance. It's designed to be installed onto vertical wall surfaces, and has integrated mounting holes that accept M20 fasteners for securing the base into position. The friction reducing insert sleeve is constructed of thermoplastic which aids in davit rotation.   When used as part of our complete system, this base meets the requirements of EN795:2012, EN1496:2006, CEN/TS 16415: 2013, and AS/NZS 5532. All 3M™ DBI SALA® HC Bases are designed to be used in combination with 3M™ DBI SALA® HC Davit Masts, and together form a perfectly matched confined space rescue and work support system. When it comes to confined space entry/rescue, it's essential that equipment operates perfectly and quickly. 3M has an extensive line of rescue and retrieval systems with decades of proven field service. Safety engineers and site directors trust 3M™ DBI SALA® for the type of high quality, rugged systems that will ensure top performance when it is needed the most.

Typical Properties

Resources