1. Australia
  2. All 3M Products
  3. Abrasives
  4. Custom Abrasives
  5. 3M™ Trizact™ Cloth 237AA - Custom Sizes

3M™ Trizact™ Cloth 237AA - Custom Sizes

3M ID 44004732838
  • Trizact™ abrasives can last up to five times longer than conventional abrasives
  • X-weight backing is stiff and durable – standing up to ridges and contours on steel
  • Aluminium Oxide Mineral cuts sharp yet finishes fine
 More...
View all details
Specifications
Backing Material
Cloth
Micron Grade
A30
Mineral Type
Aluminum Oxide
Details

3M™ Trizact™ Cloth 237AA combines aluminium oxide mineral fine finishing qualities with a durable X-weight backing. Our 237AA cloth makes a good match for workpieces that demand aggressive sanding but fine finishes. Custom sizes are available.

Use 3M™ Trizact™ Cloth 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. Our 237AA cloth is designed for the final touch ups and refinements that come at the end of an abrasive sequence. Custom sizes are available. An X weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won't tear or shell. It's excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won't yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 237AA cloth is available in grades A6 to A160, so operators can choose the right grade for their application. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

  • Trizact™ abrasives can last up to five times longer than conventional abrasives
  • X-weight backing is stiff and durable – standing up to ridges and contours on steel
  • Aluminium Oxide Mineral cuts sharp yet finishes fine