1. Australia
  2. All 3M Products
  3. Abrasives
  4. Abrasive Belts
  5. Non-woven Belts
  6. Scotch-Brite™ Surface Conditioning Low Stretch Belt, SiC Very Fine, 915 mm x 1530 mm, 1 per case

Scotch-Brite™ Surface Conditioning Low Stretch Belt, SiC Very Fine, 915 mm x 1530 mm, 1 per case

  • 3M ID AC019309148

Tough aggressive non-woven belt offered in a wide range of grades for heavy duty deburring and finishing

For use on backstand and off hand equipment

Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges

View more details

Whether it’s time to put your expertise together with ours and dive into details or there’s something specific you’re not finding, we’re here to help you out.

Details

Highlights
  • Tough aggressive non-woven belt offered in a wide range of grades for heavy duty deburring and finishing
  • For use on backstand and off hand equipment
  • Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges
  • Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
  • Aggressive cutting without gouging, removes surface imperfections, grindlines, mill, and other marks

Our durable Scotch-Brite™ SE Surface Conditioning Belt was built to last, resisting both wear and sharp edges when used for cleaning, blending, deburring and finishing on a variety of metals.

Constructed of resin-reinforced non-woven fibre, our Scotch-Brite™ SE Surface Conditioning Belts resist loading and avoid under-cutting or gouging of the work piece. We engineered this belt to exhibit high initial and extended rates of cut, while maintaining superior edge durability. All belts may be used for “low stretch” applications. We also included a woven fabric (scrim) in our conditioning products, which is embedded in the nylon structure to provide additional strength and durability for edge work, deburring and efficient blending of all metal types. The non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs. Trust Scotch-Brite™ Belts to deliver fantastic finishes.Scotch-Brite™ SE Surface Conditioning Belt uses course grade aluminium oxide abrasive. aluminium oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminium oxide mineral is widely used in grinding applications in addition to sanding and finishing use. aluminium oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.

Typical Properties

Resources