3M™ Performance Pressure HVLP Atomising Head Refill Kit

  • Options available
  • | Select product options for IDs.

Quick-change nozzles in sizes 1.1, 1.4 and 1.8 for spraying a wide range of industrial and automotive coatings

Nozzles attach to the spray gun and whip hose easily without the need for additional tools

Like-new spray performance with each new atomizing head

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 1MB)

Details

Highlights
  • Quick-change nozzles in sizes 1.1, 1.4 and 1.8 for spraying a wide range of industrial and automotive coatings
  • Nozzles attach to the spray gun and whip hose easily without the need for additional tools
  • Like-new spray performance with each new atomizing head
  • Excellent pattern control, atomization and transfer efficiency
  • SECURE: Locking collar and fittings firmly attach nozzles to spray gun body and whip hose|| Use exclusively with the 3M™ Performance Spray Gun

3M™ Performance Pressure HVLP Atomising Heads are designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively for pressure-feed applications using the 3M™ Performance Spray Gun, offering like-new spray performance with the change of each nozzle.

What makes the 3M™ Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun – and only the atomising head – it's like getting a brand-new spray gun every time you swap the nozzle. Get the pattern control, atomisation and transfer efficiency you expect from a premium spray gun – all while helping to drive more consistent spray performance across each job, every day.

3M™ Performance Pressure HVLP Atomising Head Refill Kits are available in sizes 1.1mm, 1.4mm and 1.8mm atomising heads for spraying a wide range of industrial and automotive coatings, including high-viscosity coatings, sprayable fillers, high-build primers, primer surfacers, sealers, single-stage top coats, solvent-based paints, waterborne paints and clearcoats.

The replaceable nozzles are used exclusively with the 3M™ Performance Spray Gun system and attach to a supply hose for continuous, bulk spraying from a pressure pot or pressure tank. The atomising heads attach to the 3M™ Performance Spray Gun whip hose and are tightly secured to the spray gun with a specially-designed locking collar. No additional tools required for changeouts. Simply remove the nozzle from the spray gun, and either appropriately clean the fluid tip or replace it to keep your spray gun performing like new.

Typical Properties

Resources