1. Australia
  2. All 3M Products
  3. Abrasives
  4. Sheets & Rolls
  5. Film Sheets & Rolls
  6. 3M™ Diamond Microfinishing Film Roll 675L

3M™ Diamond Microfinishing Film Roll 675L

3M ID 60440124836
  • Micron-graded diamond mineral delivers close tolerance precision finishes for medium stock removal
  • Enables slow abrasive feed rates and fewer steps which reduces abrasive costs
  • Polyester film backing allows roll to be used dry or wet with surface lubricants
  • An exceptional roll for thermal spray finishing of contour / complex shapes
 More...
View all details
Specifications
Backing Material
Polyester Film
Bonding Type
Resin
Brand
3M™
Core Size (metric)
76.2 mm
Hole Configuration
Plain
Industries
Aerospace, General Industrial, Precision Grinding & Finishing, Transportation & Heavy Equipment
Micron Grade
74 μm
Mineral Type
Diamond
Overall Length (Metric)
15.24 Metre
Overall Width (Metric)
101.6 mm
Primary Application
Metalworking
Product Form
Roll
Details

Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Roll 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.

High-quality Materials for Micro-finishing

3M™ Diamond Microfinishing Film Roll 675L securely anchors micron-graded diamonds to a polyester film backing. Known for its strength and resilience, the polyester film backing keeps the abrasive from skidding or deflecting when run. This backing helps the superabrasive belt stay taut and tough so that it can withstand heavy-duty finishing. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.

Waterproof Backing

Polyester film backings are also water resistant, so the abrasive may be run with a wet surface lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. When used in roll form for a process like superfinishing, our 675L roll enables slow abrasive feed rates and requires fewer steps, because of its durability, which in turn can reduce costs.

Tips for Achieving Desired Roughness Average

Many micro-finished products require a specific Ra, or roughness average. To obtain the desired Ra when applying thermal spray coatings, we recommend following a unique sequence of steps tailored to the substrate. A Ra of 2.5 to 5 on Tungsten Carbide, for example, will likely require a film with grade 74u followed by films 45u, 30u and 20u. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.

Overall, this micron-graded diamond abrasive delivers the desired finish without compromising the integrity of the substrate. Its strength and versatility make it a suitable abrasive for your finishing needs.

  • Micron-graded diamond mineral delivers close tolerance precision finishes for medium stock removal
  • Enables slow abrasive feed rates and fewer steps which reduces abrasive costs
  • Polyester film backing allows roll to be used dry or wet with surface lubricants
  • An exceptional roll for thermal spray finishing of contour / complex shapes
  • Colour coded to reduce the risk of error and mixing up abrasive grades