1. Australia
  2. All 3M Products
  3. Abrasives
  4. Discs
  5. Film Discs
  6. 3M™ Trizact™ Hookit™ Film Disc 268XA

3M™ Trizact™ Hookit™ Film Disc 268XA

Products
  • Proprietary 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Creates high gloss level for glass defect repair and solid surface finishing
  • Micron sized abrasive pyramids produce a high-gloss finish
  • Well suited for use on mini random orbital sanders to produce a polish-ready finish
 More...
View all details
Max RPM
Max_RPM
Products Available
 Max RPM
All Models
Close
Specifications
Attachment Type
Hook & Loop
Backing Material
Film
Brand
Trizact™
Coat Type
Closed Coat
Hole Configuration
600Z
Industries
Composite, Woodworking
Max RPM
12000
Max Speed
12000 rpm
Micron Grade
A10, A35, A6
Mineral Type
Aluminum Oxide
Overall Diameter (Metric)
152.4 mm
Position
Good
Primary Application
Woodworking, Composite & Advanced Materials
Product Form
Disc
Sub Industries
Cabinetry, Custom Woodworking and Millwork, Furniture, Primary Wood and Panel Processing
Details

We manufacture 3M™ Trizact™ Hookit™ Film Disc 268XA using proprietary micro-replication technology where micron-graded aluminium oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a film backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

When compared to conventional abrasive products, our 3M™ Trizact™ abrasives produce a finer finish, achieve results faster, and last longer. The 3M™ Trizact™ Hookit™ Film Disc 268XA is suitable for use on a variety of solid surfaces, topcoats, and to accommodate most finish and process requirements. It is manufactured with the 3M™ Hookit™ attachment system for quick mounting and removal and to hold the disc securely in place during use. Hookit™ discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the disc. This disc can be run wet or dry.Unlike conventional abrasives, our 3M™ Trizact™ discs start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. We made 3M™ Trizact™ discs to last longer than conventional discs and provide precise finish control so that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface ensure consistent performance and eliminate disc-to-disc variation.The 3M™ Trizact™ Hookit™ Film Disc 268XA uses aluminium oxide abrasive mineral. Aluminium oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminium oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminium oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

  • Proprietary 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Creates high gloss level for glass defect repair and solid surface finishing
  • Micron sized abrasive pyramids produce a high-gloss finish
  • Well suited for use on mini random orbital sanders to produce a polish-ready finish
  • Produces finer finishes than paper and film-backed abrasives