3M™ Cloth Belt 341D

269  Products
  • Tube-shaped band fits inner and outer contours to remove parting lines, imperfections, and burrs
  • X-weight cloth backing withstands heavy sanding and grinding
  • Resin bond withstands high heat and pressure
  • Tough aluminium oxide abrasive mineral cuts fast and performs well on many substrates
 More...
View all details
Overall Width (Metric)
Overall_Width_Metric
Overall Length (Metric)
Overall_Length_Metric
Product Colour
Product_Color
269 Products Available
 Overall Width (Metric), Overall Length (Metric)  Product Colour
All Models
Showing 24 of 269
Close
Specifications
Back Colour
Brown
Backing Material
Cloth
Backing Weight
X Weight
Brand
3M™
Coat Type
Closed Coat
Flex Type
Single-flex
Grit
24, 36, 40, 50, 60, 80, P100, P120, P150, P180, P240, P320, P400
Industries
Marine, Metalworking, Woodworking
Mineral Type
Aluminum Oxide
Overall Length (Metric)
1066.8 mm, 11226.8 mm, 1219.2 mm, 122 cm, 1333.5 mm, 1371.6 mm, 1511.3 mm, 1524 mm, 1612.9 mm, 1790.7 mm, 1828.8 mm, 1905 mm, 2006.5 mm, 2032 mm, 2133.6 mm, 2159 mm, 2286 mm, 2400.3 mm, 2438.4 mm, 2489.2 mm, 2616.2 mm, 2692.4 mm, 271.475 mm, 2717.8 mm, 2743.2 mm, 3048 mm, 3200.4 mm, 3352.8 mm, 3517.9 mm, 393.7 mm, 4013.2 mm, 4267.2 mm, 480.822 mm, 508 mm, 5130.8 mm, 533.4 mm, 539.75 mm, 603.25 mm, 609.6 mm, 6959.6 mm, 7239 mm, 7620 mm, 914.4 mm
Overall Width (Metric)
101.6 mm, 1066.8 mm, 12.7 mm, 1270 mm, 1295.4 mm, 1320.8 mm, 152.4 mm, 203.2 mm, 228.6 mm, 25.4 mm, 254 mm, 29.972 mm, 38.1 mm, 381 mm, 457.2 mm, 482.6 mm, 50.8 mm, 57.15 mm, 63.5 mm, 635 mm, 660.4 mm, 76.2 mm, 762 mm, 88.9 mm, 914.4 mm, 939.8 mm
Product Colour
Brown
Product Form
Belt
Splice Type
Fabri-lok, Film-lok, Lap Skived, Sine Wave, Sine-lok
Sub Industries
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plating & Polishing, Plumbing Fixtures, Primary Wood and Panel Processing, Turbine Engines
Wet or Dry
Dry
Details

3M™ Cloth Belt 341D is a durable aluminium oxide cloth belt recommended for your metal deburring, general metalworking, and some woodworking applications. It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood.

3M™ Cloth Belt 341D comes with fast-cutting aluminium oxide abrasive grains resin-bonded to a durable X-weight cotton cloth backing to provide you with continuous cut and long-life performance necessary for more aggressive dry sanding applications. For finishing on metal, the closed coat construction offers a consistent, fine finish, and is suitable for producing a grain pattern. This belt should not be run wet.

Aluminium oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.

Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.

Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimises chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts.

  • Tube-shaped band fits inner and outer contours to remove parting lines, imperfections, and burrs
  • X-weight cloth backing withstands heavy sanding and grinding
  • Resin bond withstands high heat and pressure
  • Tough aluminium oxide abrasive mineral cuts fast and performs well on many substrates
  • Bands fit onto a rubber expander wheel attachment (sold separately) for use with a die grinder or rotary drill