3M™ Cloth Belt 461F

10  Products
  • Sharp silicon carbide mineral cuts faster than aluminium oxide and produces a consistent finish
  • Tough, water-resistant polyester backing supports wet or dry applications from heavy-duty grinding to fine finishing without tearing or nicking
  • Cloth backing provides flexibility
  • Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat, and water
 More...
View all details
Overall Width (Metric)
Overall_Width_Metric
Overall Length (Metric)
Overall_Length_Metric
10 Products Available
 Overall Width (Metric)  Overall Length (Metric)
All Models
Close
Specifications
Back Colour
Grey
Backing Material
Polyester Cloth
Brand
3M™
Coat Type
Closed Coat
Grit
P120, P240, P320, P60, P600, P80
Mineral Type
Silicon Carbide
Overall Length (Metric)
2690 mm, 533 mm, 5330 mm
Overall Width (Metric)
100 mm, 30 mm
Product Form
Belt
Details

3M™ Cloth Belt 461F is constructed of sharp silicon carbide abrasive that fractures easily and consistently produces an excellent finish for the duration of the belt life. This resin-bonded cloth belt gives you flexibility, durability, and consistent performance for grinding, blending, deburring, and finishing on all metals.

3M™ Cloth Belt 461F is frequently used for coarse grade grinding on stainless steel and titanium, as well as for glass polishing. The heavy polyester cloth backing provides rugged durability and tear-resistance, and is suitable for wet or dry applications. Belts come in both YF-weight polyester and XF-weight polyester. Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding, as well as grinding applications on metal. It can also be used for glass and mirror grinding, finishing, and polishing. While it may have a shorter life than aluminium oxide, it produces a superior finish and should be used where the best possible finish is desired. Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.

  • Sharp silicon carbide mineral cuts faster than aluminium oxide and produces a consistent finish
  • Tough, water-resistant polyester backing supports wet or dry applications from heavy-duty grinding to fine finishing without tearing or nicking
  • Cloth backing provides flexibility
  • Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat, and water
  • Use on backstands for grinding and finishing applications