1. Australia
  2. All 3M Products
  3. Tapes
  4. Sealing Tapes
  5. 3M™ All Weather Flashing Tape 8067

3M™ All Weather Flashing Tape 8067

  • 3M ID B40068318

High tack adhesive to stick securely to most common building materials at temperatures ranging from -18°C to up to 80°C, even on damp surfaces

Thin for a reliable and convenient fit into corners and under siding

No adverse reaction with many building sealants

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 511KB)

Details

Highlights
  • High tack adhesive to stick securely to most common building materials at temperatures ranging from -18°C to up to 80°C, even on damp surfaces
  • Thin for a reliable and convenient fit into corners and under siding
  • No adverse reaction with many building sealants
  • Resists UV exposure for up to 12 months (BRANZ testing ends at 3 months)
  • Available in 2 rolls widths; 76mm, and 152mm x 22.8m. Other widths may be available on request
  • Passes nail sealability before and after thermal cycling according to AAMA 711-05
  • Split-liner for easy and accurate positioning of tape, especially long lengths
  • Sticks aggressively to itself and self-seals around nails and staples to prevent moisture intrusion
  • Tough to resist punctures and tears during application and service life
  • Does not require primers, staples or other mechanical fixings
  • BRANZ Appraised 775 (2012

3M™ All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even adheres to damp surfaces.

Bonds to Most Common Building Materials without Primers and Staples

3M™ All Weather Flashing Tape 8067 is engineered to increase productivity while solving the most critical flashing problems. Unique acrylic pressure sensitive adhesive sticks and stays stuck to seal around windows, doors and other openings. To prevent moisture intrusion, the thin backing construction effectively conforms and seals around nails and staples with less buildup under siding. Proprietary construction will not liquefy, bleed, or melt in contact with many building sealants or in extreme summer temperatures.


Recommended Applications


  • Sealing joints around sills, jambs and heads of rectangular windows in wood frame construction

  • Sealing around other wall interruptions in non roof areas, such as thresholds, dryer vents and hose bibs

  • When installed properly as a concealed flashing in vertical walls in frame construction, it prevents moisture intrusion or water leaks and avoids the costly problems caused by water infiltration


Stays Stuck, Even in Extreme Temperatures

3M™ All Weather Flashing Tape 8067 resists UV exposure for up to 12 months. It can be applied to materials without primers or staples and bonds in surface temperatures from 0° to 176°F ( 18° to 80°C) per AMAA 711 05. Its proprietary backing seals around nails and staples to prevent moisture intrusion. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. The split paper release liner provides fast application with easy and accurate positioning of the tape.

Suggested applications
  • Flashing exposed timber and building wrap in accordance with the Australian Building Code, prior to window installation in wood framed construction
  • Sealing joints in building wrap and rigid air barriers
  • Flashing pipe penetrations through building wraps and rigid air barriers

Typical Properties

Resources