Australia
All 3M Products

3M Xtract

Go for performance. Leave the dust behind.

Discover the 3M Xtract™ Cubitron™ II Random Orbital Sanding range - one product range to help you transform your entire sanding process, with round sanding discs for almost any application.

< PREVIOUS VIDEO NEXT VIDEO >

The only known orbital sanding discs range with 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular-shaped ceramic mineral is designed to slice through substrates, rather than gouging or ‘plowing’ like conventional abrasives.

This gives you a disc that cuts up to twice as fast¹ and lasts up to six times longer² than conventional abrasives—while also providing a great finish.

Cuts up to twice as fast¹ and lasts up to six times longer²

Hook and loop backing for quick and easy disc changes.

Allows for a cleaner work environment than traditional discs.

Ideal for a wide variety of substrates and applications including stock removal and fine finishing.

Available in a variety of grades ranging from 40+ to 1000+.

Choose your backing

Backing choice can impact productivity more than grit.

Four products, each featuring 3M’s proprietary Precision-Shaped Grain on a different orbital sander backing pad so you can easily select the right abrasives for your full process – from stock removal to fine finishing.

Need longer life?

Film Backing
Ultra-uniform scratch with strong edge durability for consistent finishes. It’s an excellent all-rounder and ideal starting point.

Grades: 80+ to 1000+

BUY 775l
Need less dust?

Net Backing
Pairs with vacuum to help remove dust at the source, reduce loading, and extend round sanding disc life. The ultimate sanding dust extraction combined with market segment leading cut rate.

Grades: 80+ to 320+

buy 710W
Need to sand faster?

Paper Backing
Flexible and economical, ideal for light sanding - fast, flexible and helps to prevent heat build up during sanding.

Grades: 80+ to 1000+

buy 732u

Complete your clean sanding system with 3M Xtract™ Power Tools

Designed for optimised dust extraction.

Electric Random Orbital Sander

Smaller and lighter than traditional electric sanders, the 3M Xtract™ Electric Random Orbital Sander weighing only 3 lbs (1.36 kg) with a molded-in grip for comfort, and control, to help reduce worker fatigue even during prolonged use. Built with a 350W electric motor.

Explore 3M Xtract™ Pneumatic Random Orbital Sander
Pneumatic Random Orbital Sander

This 3M Xtract™ Pneumatic Random Orbital Sander is a self-generated sander with vacuum. It uses the inlet air to create its own venturi vacuum that extracts the dust from the work surface and expels it through a wide collection port on the back of the tool into a filter bag.

Explore 3M Xtract Electric Random Orbital Sander

¹ Cuts up to twice as fast: Compared to 3M Aluminum Oxide Abrasive Products. Results are based on total cut over four × ninety-second cycles on an automated test with maple material using 5 inch (127 mm) 80 grit discs and 3M™ Hookit™ Low Profile Disc Pad 20355. Factors affecting disc performance include (but are not limited to) tool type and performance, tool orbit, disc back-up pad, grade, substrate, operator pressure, and dust extraction system. Achieving more than 2× is possible with an optimised system.

² Lasts up to six times as long: Compared to 3M Aluminum Oxide Abrasive Products. Results are based on total cut over twenty-four × ninety-second cycles on an automated test with maple material using 5 inch (127 mm) 180 grit discs and 3M™ Hookit™ Low Profile Disc Pad 20355. End of life is defined as when the 3M disc cut rate drops to 75% of the initial cut rate of the conventional abrasive disc. Factors affecting disc performance include (but are not limited to) tool type and performance, tool orbit, disc back-up pad, grade, substrate, operator pressure, and dust extraction system.