Bonding is undergoing a revolution. And while the current system of adding adhesive to a bracket works fine, the APC™ Flash-Free Adhesive Coated Appliance System works even better—and faster. The system’s next generation, resin-soaked nonwoven mats adhere to the enamel for a more reliable bond that also eliminates the process of flash removal. It’s an idea anyone could think of, but only we could make.
Traditional paste adhesives require flash cleanup which can leave uneven adhesive clumps around the edges of brackets, allowing a surface area for food particles to accumulate or plaque to form. Our APC Flash-Free Adhesive forms a smooth meniscus when the adhesive coated bracket is seated, which seals the tooth surface around the edges of the bracket.
APC Flash-Free Adhesive has only 5 bonding steps and with that reduction in variability you can achieve an overall bond failure rate of less then 2 percent.*
Because it requires 11 steps, traditional bonding systems inject lots of variability into the bonding process leading to unacceptably high failure rates.
Flash-free adhesive coated brackets have a smooth, consistent adhesive base that protects the tooth under the bracket. By eliminating flash, you eliminate everything that can go wrong during clean up.
Flash can cause problems with bacteria and plaque accumulation and accidental bracket movement. And clearing away excess flash is exhausting.
Flash-free adhesive coated brackets have a smooth, consistent adhesive base that protects the tooth under the bracket. By eliminating flash, you eliminate everything that can go wrong during clean up.
Powered by 3M science, APC Flash-Free Adhesive leverages several of the highly advanced 3M Technology Platforms such as nanotechnology, adhesives and nonwoven materials. The result is a revolutionary way to bond orthodontic appliances that eliminates the many challenges of bonding with flash.
Orthodontic appliances bonded using APC Flash-Free Adhesive have reliable bond strength that’s comparable to 3M Transbond™ XT Adhesive and 3M APC™ II Adhesive* while eliminating challenging and time-consuming flash removal.
Orthodontic appliances bonded using APC Flash-Free Adhesive have reliable bond strength that’s comparable to 3M Transbond™ XT Adhesive and 3M APC™ II Adhesive* while eliminating challenging and time-consuming flash removal.
The pre-coated resin forms a smooth meniscus around the bracket base. This creates an even seal and protects the enamel under the surface of the bracket from acid erosion caused by microleakage.
The pre-coated resin forms a smooth meniscus around the bracket base. This creates an even seal and protects the enamel under the surface of the bracket from acid erosion caused by microleakage.
Minimal bracket drift occurs after initial placement because of the adhesive bond provided by nonwoven materials. A web of micron–sized polypropylene fibers provide the necessary thickness and loft needed for a reliable bond.*
Minimal bracket drift occurs after initial placement because of the adhesive bond provided by nonwoven materials. A web of micron–sized polypropylene fibers provide the necessary thickness and loft needed for a reliable bond.*
As with any revolutionary technology, there’s a lot to learn about the APC Flash-Free Adhesive Coated Appliance System. Check out these videos and discover how this innovative bonding system can fit into your practice.
Learn how APC Flash-Free adhesive revolutionises orthodontic bonding.
If you want all the technical details, we’ve assembled them here.
Explore our featured brackets available precoated with APC Flash-Free adhesive and our comprehensive product portfolio. It's time to leave flash behind.
Your form was submitted successfully!
An error has occurred while submitting. Please try again later...
Your form was submitted successfully!
One of our team will be in contact in the next 2 business days.
An error has occurred while submitting. Please try again later...