1. All 3M Products

Scotch-Brite™ Roloc™ Light Grinding and Blending Disc

Products
  • Grinds and blends in a single step
  • 3M™ ceramic aluminum oxide abrasives combines high cut-rate with blending ability to eliminate finishing steps
  • Disc backup pad helps provide high edge durability for consistent finishing and long disc life
  • Scotch-Brite™ material won’t melt on hot welds allowing blending without waiting
 More...
Diameter (Metric)
Max RPM
Products Available
 Diameter (Metric)  Max RPM
All Models
Close
Specifications
Application Category
Blending/Deburring, Grinding/Metal Stock Removal
Attachment Type
TR
Back Color
Blue
Brand
Scotch-Brite™
Diameter (Metric)
50 mm, 50.8 mm, 76 mm
Form Type
Disc
Health and Safety
Eye Protection, Hand Protection, Hearing Protection, Respiratory Protection
Hole Configuration
Plain
Industries
Aerospace, General Industrial, Metalworking, MRO, Paint Preparation, Transportation & Heavy Equipment
Max RPM
18000, 23000
Mineral Type
Ceramic
Position
Best
Primary Application
Metalworking
Product Form
Disc
Sub Industries
Metal Fabrication
Details

We manufacture the Scotch-Brite™ Roloc™ Light Grinding and Blending Disc with a ceramic abrasive grain blend to achieve a high cut-rate for optimal weld grinding and blending in mild-steel applications. In these instances, light grinding and blending discs are designed to effectively blend and refine a grade 36 scratch or finer.

Designed for the 3M™ Roloc™ quick change attachment system, our no-hole center versions allow use of more of the disc surface as well as quick and easy disc change-out. Additionally, our light grinding and blending discs can often single-handedly prepare surfaces for painting, where a 3 mil or greater paint thickness is being applied, without adding a final dual-action sanding step.3M™ ceramic aluminum oxide abrasive is a ceramic mineral designed using our proprietary process to enhance toughness and hardness of the grain for a higher level performance. Ceramic aluminum oxide blend is engineered to fracture frequently and surpasses aluminum oxide abrasives in both cut-rate and durability. Perfect for moderate to heavy stock removal as well as finishing, ceramic abrasives are built to cut fast and handle intense heat and stress applications.Our 3M™ Roloc™ quick change discs are smaller discs that easily and quickly attach onto a Roloc™ disc pad (sold separately) so that you can conveniently change discs fast and easily to accommodate different tasks or multi-step finishing processes. The Roloc™ system provides a secure attachment even for heavy-duty applications, and the variety of available 3M™ Roloc™ discs allows swapping from one application to the next in seconds. Each attachment is also color-coded to identify its grade, making it easy to grab the grade required for different applications.We developed Scotch-Brite™ surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc.

  • Grinds and blends in a single step
  • 3M™ ceramic aluminum oxide abrasives combines high cut-rate with blending ability to eliminate finishing steps
  • Disc backup pad helps provide high edge durability for consistent finishing and long disc life
  • Scotch-Brite™ material won’t melt on hot welds allowing blending without waiting
  • Convenient 3M™ Roloc™ attachment system offers quick and easy disc change-out for multi-step finishing processes
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English