1. All 3M Products

Scotch-Brite™ EXL Deburring Wheel, 152.4mm x 45.4mm x 25.4mm, 8A MED, 3 per case

3M ID 61500126588
  • Solid, dense, and conformable wheel produces a professional finish the first time, without undercutting, gouging, or distorting the workpiece
  • Effective for all types of metals, composites, and glass, allowing one wheel to perform more tasks
  • Convolute construction keeps the wheel running smooth, producing a consistent, superior finish
  • Unique resin system minimises smearing, reducing time spent cleaning surfaces
 More...
Specifications
Application Category
Blending/Deburring, Finishing/Polishing
Attachment Type
Centre Hole
Brand
Scotch-Brite™
Center Hole Diameter (Metric)
25.4 mm
Form Type
Convolute/Deburring
Industries
Marine, Metalworking
Max RPM
6000
Mineral Type
Aluminum Oxide
Overall Diameter (Imperial)
6 Inch
Overall Diameter (Metric)
152.4 mm
Overall Width (Metric)
25.4 mm
Position
Good
Primary Application
Metalworking
Product Form
Wheel
Sub Industries
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
Details

Scotch-Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Its conformable characteristic makes the wheel ideal for deburring stamped or laser cut parts, or for finishing after belt sanding.

The finished result is a clean surface without smearing, reducing the need for additional clean up and preparation. Convolute construction and clean, uniform wear keep the wheel running smoothly and help the operator attain a professional finish while minimising fatigue. Our Scotch-Brite material runs cool and provides the EXL Deburring Wheel with uniform wear and keeps fresh abrasives continuously exposed, making it a superior choice on heat sensitive substrates. The toughness of the wheel extends its service life.Scotch-Brite™ EXL Deburring Wheel is available with silicon carbide or aluminium oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminium oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminium oxide, it produces a finer finish.Scotch-Brite™ is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibres. Combining abrasives with the fibres creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibres.

  • Solid, dense, and conformable wheel produces a professional finish the first time, without undercutting, gouging, or distorting the workpiece
  • Effective for all types of metals, composites, and glass, allowing one wheel to perform more tasks
  • Convolute construction keeps the wheel running smooth, producing a consistent, superior finish
  • Unique resin system minimises smearing, reducing time spent cleaning surfaces
  • Minimises heat build up to reduce risk of discolouration and warping on heat-sensitive substrates
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English