|
|
---|---|
Application Category
|
Blending/Deburring, Finishing/Polishing
|
Attachment Type
|
Centre Hole
|
Brand
|
Scotch-Brite™
|
Center Hole Diameter (Metric)
|
127 mm, 25.4 mm, 76 mm, 76.2 mm
|
Form Type
|
Convolute/Deburring
|
Industries
|
Marine, Metalworking
|
Max RPM
|
4500, 6000
|
Mineral Type
|
Aluminum Oxide, Silicon Carbide
|
Overall Diameter (Metric)
|
152.4 mm, 200 mm, 203.2 mm, 305 mm
|
Overall Width (Metric)
|
25.4 mm, 50.8 mm
|
Position
|
Good
|
Primary Application
|
Deburring & Surface Conditioning, Metalworking, Other Door Assembly Applications
|
Product Form
|
Wheel
|
Sub Industries
|
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
|
Scotch-Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Its conformable characteristic makes the wheel ideal for deburring stamped or laser cut parts, or for finishing after belt sanding.
The finished result is a clean surface without smearing, reducing the need for additional clean up and preparation. Convolute construction and clean, uniform wear keep the wheel running smoothly and help the operator attain a professional finish while minimising fatigue. Our Scotch-Brite material runs cool and provides the EXL Deburring Wheel with uniform wear and keeps fresh abrasives continuously exposed, making it a superior choice on heat sensitive substrates. The toughness of the wheel extends its service life.Scotch-Brite™ EXL Deburring Wheel is available with silicon carbide or aluminium oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminium oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminium oxide, it produces a finer finish.Scotch-Brite™ is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibres. Combining abrasives with the fibres creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibres.