1. All 3M Products

3M™ Wrap Film 1080-M10 Matte White, 1524mm x 22.7M

3M ID 75347214522
  • Use it right out of the box, no need to print or apply an overlaminate
  • Manufactured with two color layers for dimensional stability and durability
  • 3.5 mil cast film for easier handling and good conformability and lifting resistance
 More...
Specifications
Adhesive Colour
Grey
Adhesive Content
Solvent acrylic
Adhesive Controltac/Comply
Controltac™ and Comply™ v3
Adhesive Features
Air-Release
Adhesive Type
Pressure-sensitive
Application Method
Dry
Applications
Cars & Vans, Trucks and trailers, Vehicles & Transportation, Watercraft
Application Surface
Compound curves, Concave surfaces, Corrugations, Flat, Flat with rivets, Simple curves
Application Temperature (Celsius)
+16°C minimum (air and substrate)
Brand
3M™
Colour Name
White
Colour Palette
White
Film Type
Cast
Length
22.86 m
Liner
PE Coated kraft paper
Opacity
Opaque
Performance Level
Premium
Product Code
1080-M10
Product Usage
Exterior
Removability
Removable with heat
Service Temperature
-60°C to +107°C
Substrate Type
ABS, Aluminium, Paint, PMMA, Polycarbonate
Surface Finish
Matte
Surface Type
Flat, Simple curves
Vehicle Type
Boat, Bus, Tram & Metro, Car & Van, Recreational Vehicle, Truck & Trailer
Width
1.5 m
Details

Separate yourself from the pack. Whether you want to give your vehicle a makeover, update its style or just turn heads, 3M™ 1080 Wrap Film Series is a simple and easy way to express yourself.

The material is soft and flexible allowing it to conform to contours and bend easily. The pressure-activated adhesive allows you to slide and reposition the film until you apply firm pressure. The non-visible air release channels assure a fast, easy and virtually bubble-free installation.

This material can be used on the interior or exterior of your vehicle such as bonnet, roof, boot, dash parts, mirrors, trims, or you can even wrap the whole exterior of the vehicle.

It offers long-term removability from painted surfaces and does not require an over laminate. Which means you can enjoy your personalised look without having to be off the road for too long.

NOTE: Areas repaired with body filler must be sanded, epoxy primed and finished with OEM (Original Equipment Manufacturer) paint or clear coat. Any recently applied finish must be cured for the full amount of time recommended by the paint manufacturer before applying film.

All wrap films, including film series 1080, should be applied to a “like new” vehicle finish for the best results. 3M basic product warranty ensures that the product arrives ready to use. Any rust, bubbling, scratches, dents or other damage will be visible through the film, and such surface imperfections may damage the film or cause the film to fail prematurely. 3M recommends using a certified 3M graphics installer to ensure a professional result.

  • Use it right out of the box, no need to print or apply an overlaminate
  • Manufactured with two color layers for dimensional stability and durability
  • 3.5 mil cast film for easier handling and good conformability and lifting resistance
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English