1. All 3M Products

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive 810

3M ID 62329814362
  • 10 minute work life
  • Low odour
  • Toughened for impact resistance
  • Bonds oily metals with minimal surface prep
 More...
Specifications
Adhesive Type
Acrylic
Brand
Scotch-Weld™
Container Size
1.64 fl oz (US)
Full Cure
8-24 Hours @ 72 F (22 C)
Indoor/Outdoor
Both
Industries
Metalworking, Signage, Specialty Vehicle, Woodworking
Open Time
10 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Each
Product Type
Acrylic Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
3600 psi
Shelf Life in Months (from date of manufacture)
12
Storage Temperature
32 F (0 C)
Viscosity
Self-Leveling
Volume (metric)
48.5 mL
Work Time
10 Minutes
Details

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive 810 is a toughened, two-part acrylic adhesive. 1:1 mix ratio, 10 minute work life and handling strength in approximately 10 minutes.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Provides High Shear and Peel Strength and is Toughened for Impact Resistance
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.

Recommended Applications

  • Sporting goods (metal to metal, metal to plastic bonding)
  • Appliance manufacturing (metal to metal, metal to glass)
  • Electronic casing assembly

10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.

Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

  • 10 minute work life
  • Low odour
  • Toughened for impact resistance
  • Bonds oily metals with minimal surface prep
  • Bonds most plastics, composites and metals