1. All 3M Products
  • 3M™ PPS™ Series 2.0 adaptor #S11, 26018, 3/8 Male, 18 Thread NPS, 4 per case
  • 3M™ PPS™ Series 2.0 adaptor #S11, 26018, 3/8 Male, 18 Thread NPS, 4 per case

    3M ID 60455002885
    • For use with 3M™ PPS™ Series 2.0 – our next generation, highest performing disposable spray cup system
    • Broad selection – choose adapters to convert virtually any spray gun for PPS™ Series 2.0
    • Wider four-point connection improves stability for total confidence
    • Durable stainless steel adapter resists corrosion and solvents
     More...
    Specifications
    Brand
    PPS™
    Type
    Type S11
    Details

    3M™ PPS™ Series 2.0 Adapter is designed to allow almost any spray gun to work with the 3M™ PPS™ Series 2.0 Spray Cup System. The adapter delivers a solid four-point connection to the PPS™ Series 2.0 cup lid, maintaining a tight, reliable seal even when spraying upside down. Durable stainless steel adapters are available in a broad selection for a wide range of spray guns.

    • For use with 3M™ PPS™ Series 2.0 – our next generation, highest performing disposable spray cup system
    • Broad selection – choose adapters to convert virtually any spray gun for PPS™ Series 2.0
    • Wider four-point connection improves stability for total confidence
    • Durable stainless steel adapter resists corrosion and solvents
    • Wider bowl design makes adapter easy to clean
    • 3M™ PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal/plastic paint cup systems
    Features

    3M™ PPS™ Series 2.0 Adapter
    3M™ PPS™ Series 2.0 adapter maximizes stability while spraying and makes cleaning easier
    Use PPS™ Series 2.0 Instantly with Almost Any Spray Gun
    The 3M™ PPS™ Series 2.0 Adapter converts a wide range of spray guns to be used with our 3M™ PPS™ Series 2.0 — the next generation of our highest performing disposable spray cup system. The adapter design provides four points of connection to the PPS™ Series 2.0 cup lid. Stainless steel adapters are durable, resist solvents and are very easy to clean. They are available in a broad selection — with very few exceptions, we have designed a PPS™ Series 2.0 Adapter for your specific spray gun model.

    3M™ PPS™ Series 2.0 features hard plastic cups, ¼-turn lid locking system and flexible, collapsible liners. It is available in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL).

    5 sizes of PPS™ 2.0 Spray Cup System
    PPS™ 2.0 Spray Cup System is available in 5 sizes to fit the most common repairs in your shop
    Next Generation of the 3M™ Paint Preparation System (PPS™)
    The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.

    Cleanest Disposable Cup System
    Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.

    3M PPS Series 2.0 Cups and Lids
    Cups feature printed mix ratios, clear access windows
    Reduce Material Waste by Mixing in the Cup
    3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you're mixing on a scale, use the "max fill" notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.

    3M PPS Series 2. 0 lid
    Domed lid design features full diameter filters in 125 or 200 microns
    Improved Fluid Flow for More Consistent Paint Application
    Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration — no assembly needed.

    More Confidence in the Connection to Your Gun
    A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.

    Increased stability for spray cup system
    Stainless steel adapters deliver four points of connection to lids
    A System for Both Solvent-Based and Waterborne Products
    Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.

    Use the Right Size Cup for Every Repair
    Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.

    Reduce Solvent Usage by up to 70%
    After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.

    PPS Series 2.0 hard cup and liner
    Disposable liners improve productivity and cleanup time
    Your Spray Gun Functions at any Angle, Even Upside Down
    Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.

    Reduces the Chance of Contamination Between Jobs
    Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.

    The Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice
    3M™ invented disposable cups for paint application and will continue to re-invent based on our customer's feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process — paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Australia - English