1. All 3M Products

3M™ PPS™ Midi Promo Kit

3M ID B40069949
  • PPS Midi Size (400mL) Promo Kits:
  • Midi (400mL) Promo Kits contains 50 disposable Lids (with pre-welded filters) for Paint: mixing, filtering and spraying of coatings (Primer, Sealer, Base-Coat, and Clear-Coat along with other coatings). Free re-useable Midi size Cup and Collar, with a generic mix volume ratio insert
  • Reduce Material Consumption: Save on Materials (Primer, Sealer, Base-Coat & Clear Coat). Important for the Painter to mix efficiently the quantities for the size of the Repair Operation (R.O.) i.e. the area to be repaired.
  • 3M™ PPS™ has the ability to reduce solvents by up to 70% from traditional gravity cups, and up to 90% with PPS and 3M Accuspray.
 More...
Details

Midi Promo kit contains 50 Lids with micron filters (full diameter), 50 Liners. Promo kit contains 1 free Midi Cup & Collar and 1 generic mix ratio insert . Maximum capacity is 400mL when filled to within 3.2 mm of liner rim.

3M™ PPS™ Midi Lids Only (400 mL). Replacement Midi Lids (with welded in filters) 25 per kit.

  • PPS Midi Size (400mL) Promo Kits:
  • Midi (400mL) Promo Kits contains 50 disposable Lids (with pre-welded filters) for Paint: mixing, filtering and spraying of coatings (Primer, Sealer, Base-Coat, and Clear-Coat along with other coatings). Free re-useable Midi size Cup and Collar, with a generic mix volume ratio insert
  • Reduce Material Consumption: Save on Materials (Primer, Sealer, Base-Coat & Clear Coat). Important for the Painter to mix efficiently the quantities for the size of the Repair Operation (R.O.) i.e. the area to be repaired.
  • 3M™ PPS™ has the ability to reduce solvents by up to 70% from traditional gravity cups, and up to 90% with PPS and 3M Accuspray.
  • Reduce cycle times with fast and easy clean up using 3M™ PPS™; often more than 50% time savings. Mix, filter and spray out of a Disposable lid (with pre-welded filter) and Liner.
  • Efficient use of Materials (less wasted paint, use what you mix)
  • Ability to spray at all angles, 90 degree to the work surface; even upside down if needed. This provides consistent material transfer which helps reduce overspray. Less Overpray means lower material consumption.
  • Consistent Material transfer, increase the probability of colour Match, improve quality.
  • Easier to use
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English