Case contains 25 Midi (400 mL) size lids with 125 Micron Filters. These are replacement lids which fit 3M™ PPS™ Midi Lids and Liners.
3M™ PPS™ Midi Lids Only (400 mL). Replacement Midi Lids (with welded in filters) 25 per kit.
- PPS Midi Size (400 mL) Lids Only Cases:
- Midi (400mL) Lids ONLY, contains 25 disposable Lids (with pre-welded filters) for Paint: mixing, filtering and spraying of coatings (Primer, Sealer, Base-Coat, and Clear-Coat along with other coatings).
- Reduce Material Consumption: Save on Materials (Primer, Sealer, Base-Coat & Clear Coat). Important for the Painter to mix efficiently the quantities for the size of the Repair Operation (R.O.) i.e. the area to be repaired.
- 3M™ PPS™ has the ability to reduce solvents by up to 70% from traditional gravity cups, and up to 90% with PPS and 3M Accuspray.
- Reduce cycle times with fast and easy clean up using 3M™ PPS™; often more than 50% time savings. Mix, filter and spray out of a Disposable lid (with pre-welded filter) and Liner.
- Efficient use of Materials (less wasted paint, use what you mix)
- Ability to spray at all angles, 90 degree to the work surface; even upside down if needed. This provides consistent material transfer which helps reduce overspray. Less Overpray means lower material consumption.
- Consistent Material transfer, increase the probability of colour Match, improve quality.
- Easier to use