1. All 3M Products

3M™ Membrane Switch Spacer 7961MP

Products
  • 0.28 mm Double Linered Membrane Switch Spacer with 200MP adhesive. 26 kg lay-flat polycoated kraft paper liners on each side. Both liners are printed.
  • Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
  • Excellent moisture and solvent resistance. High temperature resistance. High shear strength accomodates the stresses of repeated actuation. UV resistant. Easy to apply. Not messy. Easily die-cutable. Use for selective die-cutting.
 More...
Width
Length
Products Available
 Width  Length
All Models
Close
Specifications
Adhesive Type
3M™ High Performance Acrylic Adhesive 200MP, Acrylic
Backing Material
Polyester Film (PET)
Backing Thickness (metric)
0.175, 0.175 mm
Back-Side Adhesive Thickness (metric)
0.05 mm
Back-Side Adhesive Type
3M™ High Performance Acrylic Adhesive 200MP
Brand
3M™
Carrier Material
Polyester Film (PET)
Carrier Thickness (metric)
0.18 mm
Face-Side Adhesive Thickness (metric)
0.05 mm, 0.055 mm
Face-Side Adhesive Type
3M™ High Performance Acrylic Adhesive 200MP
Indoor/Outdoor
Both
Industries
Aerospace, Appliance, Automotive, Converter Solutions, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Point of Purchase, Print, Signage, Specialty Vehicle, Transportation, Woodworking
Length
0.91 m, 914 mm
Maximum Operating Temperature (Celsius)
204 Degree Celsius
Primary Liner
58# Polycoated Kraft Paper (PCK)
Primary Liner Colour
Tan
Product Form
Sheet
Secondary Liner
58# Polycoated Kraft Paper (PCK)
Secondary Liner Color
Tan
Shelf Life
18 Month
Total Tape Thickness without Liner (metric)
0.28 mm
Width
609.6 mm, 610 mm
Details

3M™ Membrane Switch Spacer 7961MP is a 51 micron 200MP high-performance acrylic adhesive double coated on each side of 178 micron polyester film carrier with double liner of 107 micron 26 kg moisture resistant lay-flat polycoated kraft

High shear strength withstand repeat stresses of switch actuation. Designed to separate switch circuitry until actuation. Same as 3M Membrane Switch Spacer 7945MP with 178 micron carrier.

  • 0.28 mm Double Linered Membrane Switch Spacer with 200MP adhesive. 26 kg lay-flat polycoated kraft paper liners on each side. Both liners are printed.
  • Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
  • Excellent moisture and solvent resistance. High temperature resistance. High shear strength accomodates the stresses of repeated actuation. UV resistant. Easy to apply. Not messy. Easily die-cutable. Use for selective die-cutting.
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English