1. All 3M Products

3M™ Membrane Switch Spacer 7961MP, 610 mm x 914 mm, 100 sheets per box

3M ID UU001508900
  • 0.28 mm Double Linered Membrane Switch Spacer with 200MP adhesive. 26 kg lay-flat polycoated kraft paper liners on each side. Both liners are printed.
  • Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
  • Excellent moisture and solvent resistance. High temperature resistance. High shear strength accomodates the stresses of repeated actuation. UV resistant. Easy to apply. Not messy. Easily die-cutable. Use for selective die-cutting.
  • Use for selective and steel rule die cutting due to its easy to die cut and process.
 More...
Specifications
Adhesive Type
3M™ High Performance Acrylic Adhesive 200MP
Backing Material
Polyester Film (PET)
Backing Thickness (metric)
0.175 mm
Back-Side Adhesive Thickness (metric)
0.05 mm
Back-Side Adhesive Type
3M™ High Performance Acrylic Adhesive 200MP
Brand
3M™
Carrier Material
Polyester Film (PET)
Carrier Thickness (metric)
0.18 mm
Face-Side Adhesive Thickness (metric)
0.055 mm
Face-Side Adhesive Type
3M™ High Performance Acrylic Adhesive 200MP
Indoor/Outdoor
Both
Industries
Metalworking, Signage, Specialty Vehicle, Woodworking
Maximum Operating Temperature (Celsius)
204 Degree Celsius
Overall Length (Metric)
914 mm
Overall Thickness (Imperial)
11 mil
Overall Width (Metric)
610 mm
Primary Liner
58# Polycoated Kraft Paper (PCK)
Primary Liner Colour
Tan
Secondary Liner
58# Polycoated Kraft Paper (PCK)
Secondary Liner Color
Tan
Total Tape Thickness without Liner (metric)
0.28 mm
Details

3M™ Membrane Switch Spacer 7961MP is a 51 micron 200MP high-performance acrylic adhesive double coated on each side of 178 micron polyester film carrier with double liner of 107 micron 26 kg moisture resistant lay-flat polycoated kraft

High shear strength withstand repeat stresses of switch actuation. Designed to separate switch circuitry until actuation. Same as 3M Membrane Switch Spacer 7945MP with 178 micron carrier.

  • 0.28 mm Double Linered Membrane Switch Spacer with 200MP adhesive. 26 kg lay-flat polycoated kraft paper liners on each side. Both liners are printed.
  • Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
  • Excellent moisture and solvent resistance. High temperature resistance. High shear strength accomodates the stresses of repeated actuation. UV resistant. Easy to apply. Not messy. Easily die-cutable. Use for selective die-cutting.
  • Use for selective and steel rule die cutting due to its easy to die cut and process.
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English