1. All 3M Products
  • 3M™ Flexomount™ Plate Mounting Tape 411DL
  • 3M™ Flexomount™ Plate Mounting Tape 411DL

    3M ID 70006386562
    • Offers excellent adhesion to both rubber and photopolymer plates
    • Provides uniform coverage of solids when halftone dot reproduction is not critical
    • Specially formulated for clean removal from plate and print cylinder
    • High adhesion helps reduce plate edge lifting
     More...
    Specifications
    Adhesive Type
    Rubber
    Air Release
    No
    Applications
    Flexographic Plate Mounting
    Backing Material
    Solid Vinyl
    Brand
    Flexomount™
    Colour
    Grey
    Composite Sleeves
    Yes
    Industries
    Print
    Length
    32.91 m
    Primary Liner
    Polycoated Kraft Paper
    Print Quality
    Solid Printing
    Print Quality (Series)
    400 Series
    Product Form
    Roll
    Secondary Liner
    Polyethylene
    Thickness
    0.38 mm
    Total Tape Thickness without Liner (metric)
    0.38 mm
    Urethane Sleeves
    Yes
    Width
    304.8 mm
    Details

    3M™ Flexomount™ Plate Mounting Tape 411DL is a double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeve systems. The adhesive is specially formulated for clean removal from both the plate and the print cylinder.

    3M™ Flexomount™ Plate Mounting Tape 411DL features a soft rubber adhesive that offers excellent adhesion to both rubber and photopolymer plates. The high adhesion helps reduce the tendency for plate edge lifting and makes it a good choice for long runs. This gray double coated tape helps provide uniform coverage of solids when halftone dot reproduction is not critical.

    Recommended Applications

    Mounting photopolymer print plates to flexographic printing cylinders or sleeve systems
    Mounting rubber printing plates to flexographic printing cylinders or sleeves

    Keep the Presses Running and your Customers Coming Back
    For decades, our products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.

    • Offers excellent adhesion to both rubber and photopolymer plates
    • Provides uniform coverage of solids when halftone dot reproduction is not critical
    • Specially formulated for clean removal from plate and print cylinder
    • High adhesion helps reduce plate edge lifting
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Australia - English