1. All 3M Products

3M™ Double Coated Tape 9420

3M ID B40070415
  • 4 mil red double coated polyester tape on a hard, dense 60# DK liner. The liner reduces edge burr in hand tool processing of metal plates. Red tape for splicing visibility.
  • Excellent UV resistance. Good adhesion to a wide variety of materials such as HSE high surface energy, LSE low surface energy and metals. Good temperature and humidity resistance.
  • High performance splicing in printing applications. Good on films and foils.
 More...
Specifications
Applications
Zero-Speed and General Splicing
Back-Side Adhesive Thickness (metric)
0.04 mm
Back-Side Adhesive Type
400 High Tack Acrylic
Brand
3M™
Carrier Material
Polyester
Carrier Thickness (metric)
0.03 mm
Colour
Red
Face-Side Adhesive Thickness (metric)
0.04 mm
Face-Side Adhesive Type
400 High Tack Acrylic
Industries
Paper, Print
Maximum Operating Temperature (Celsius)
65 Degree Celsius
Overall Length (Metric)
32.91 Meter
Overall Thickness (Imperial)
4 mil
Overall Width (Metric)
50.8 mm
Primary Liner
60# Densified Kraft Paper
Primary Liner Colour
Tan
Product Form
Roll
Shear Strength at 72 Degrees F (22 Degrees C)
5 Pound-Force Per Square Inch
Tape Type
Double Coated
Details

3M™ Double Coated Tape 9420 is a 4.0 mil double coated polyester with red tinted acrylic adhesive 400 on a 3.5 mil 60 lb densified kraft paper liner

Can be used for flying splices on paper and film where easy visibility for removal of spliced area is desirable.

  • 4 mil red double coated polyester tape on a hard, dense 60# DK liner. The liner reduces edge burr in hand tool processing of metal plates. Red tape for splicing visibility.
  • Excellent UV resistance. Good adhesion to a wide variety of materials such as HSE high surface energy, LSE low surface energy and metals. Good temperature and humidity resistance.
  • High performance splicing in printing applications. Good on films and foils.
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English