1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320

3M ID 70002020033
  • 0.51 mm (0.020 inch) double coated foam tape has the air release feature with a plate side adhesive technology designed to remove with less force from flexographic print plates
  • Has a medium soft density foam that is ideal for printing combinations of solids and process with halftone dots
  • Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
 More...
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Applications
Flexographic Plate Mounting
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Colour
Yellow
Composite Sleeves
Yes
Industries
Print
Overall Length (Metric)
22.86 Meter
Overall Thickness (Imperial)
22 mil
Overall Width (Metric)
457.2 mm
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Soft
Print Quality (Series)
13 Series
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.56 mm
Urethane Sleeves
Yes
Details

Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320 with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This yellow foam mounting tape provides high quality medium soft combination print.

Bubble Free Flexographic Plate Mounting
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320 is a yellow foam tape that provides high quality combination print. This is the medium soft tape for combination print. It has the air release feature that allows for bubble free mounting. This flexographic plate mounting tape has excellent resistance to lifting on press allowing for easy and clean plate removal.


Recommended Applications

Mounting photopolymer plates to flexographic printing cylinders and sleeves

Used in combination, process and solid printing processes

3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry



3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.

This is manufactured for 0.51 mm (20 mil) applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.

On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique microchannels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.

Keep the Presses Running and your Customers Coming Back
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.

  • 0.51 mm (0.020 inch) double coated foam tape has the air release feature with a plate side adhesive technology designed to remove with less force from flexographic print plates
  • Has a medium soft density foam that is ideal for printing combinations of solids and process with halftone dots
  • Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Print plates mounted on E1320 will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English