1. All 3M Products

3M™ 8424-8 Low Voltage Cold Shrink Splice Kit Diameter Range 2.5 - 21 mm Length 203 mm

Part Number 806109219283M ID 80610921928
  • Unique 3M Cold Shrink delivery system ensures fast, straightforward and consistent installation without compromising long term reliability
  • No special tools, heat or site permits are required to install Cold Shrink, making it well suited for in-field applications
  • Constant radial pressure for optimised environmental performance
  • No flame required means there is less chance of damamging the cable material
 More...
Specifications
Applications
Insulation, mechanical protection, repair
Brand
3M™
Colour
Black
Conductor Material
Aluminum, Copper
Conductor Sizes
1 AWG, 1/0 AWG, 10 AWG, 2 AWG, 4 AWG, 6 AWG, 8 AWG
Inner Diameter After Heat-Shrink
0.098 Inch
Inner Diameter Before Heat-Shrink
0.823 Inch
Material
EPDM Rubber
Maximum Connector Length (metric)
76.2 mm
Maximum Operating Temperature (Celsius)
90 Degree Celsius
Maximum Wire Gauge
20.9mm²
Minimum Wire Gauge
2.5mm²
Number of Conductors
1
Operating Temperature (Celsius)
-40 up to +90°C
Overall Diameter (Metric)
20.9 mm
Overall Length (Metric)
203.2 mm
Product Type
Cold shrinking
RoHS 2011/65/EU Compliant
Yes
RoHS EU Comments
RoHS 2011/65/EU compliant without exemption
*Important RoHS information
Shielding Type
Non-shielded, Tape Shield, UniShield®, Wire Shield
Shrink Ratio
2:1
Size
6 - 50 mm²
Splice Type
Cold Shrink
Voltage Application
Low Voltage
Details

3M Cold Shrink Insulators offer a safe, easy to install method of insulating, sealing and protecting connectors, cable, hoses, fittings and conduit. The EPDM rubber insulators are supplied pre-stretched on a removable core. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture tight seal.

The live memory action of the specially formulated material provides a permanent, durable environmental seal and insulation, with an operating temperature range of -40⁰C to 90⁰C.

  • Unique 3M Cold Shrink delivery system ensures fast, straightforward and consistent installation without compromising long term reliability
  • No special tools, heat or site permits are required to install Cold Shrink, making it well suited for in-field applications
  • Constant radial pressure for optimised environmental performance
  • No flame required means there is less chance of damamging the cable material
  • Seals tight, and retains its resiliency and pressure even after prolonged years of aging and exposure
  • Fast, straightforward installation
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English