- Unique 3M Cold Shrink delivery system ensures fast, straightforward and consistent installation without compromising long term reliability.
- No special tools, heat or site permits are required to install Cold Shrink, making it well suited for in-field applications.
- Constant radial pressure for optimised environmental performance.
- No flame required means there is less chance of damamging the cable material.
View all details
Diameter (Metric)
Length
Size
Material
Colour
19 Products Available
Diameter (Metric), Length, Size, Material Colour
Specifications
|
|
|
|---|---|
|
Applications
|
Insulation, mechanical protection, repair
|
|
Brand
|
3M™
|
|
Cable Type
|
Cable with plastic and rubber insulation, Non-Shieled, Solid Dielectric Power Cable, Power Cable
|
|
Colour
|
Black
|
|
Conductor Material
|
Aluminum, Copper
|
|
Conductor Sizes
|
1 AWG, 1/0 AWG, 10 AWG, 1000 kcmil, 1250 kcmil, 1500 kcmil, 1750 kcmil, 2 AWG, 2/0 AWG, 2000 kcmil, 250 kcmil, 3/0 AWG, 300 kcmil, 350 kcmil, 4 AWG, 4/0 AWG, 400 kcmil, 500 kcmil, 6 AWG, 600 kcmil, 650 kcmil, 700 kcmil, 750 kcmil, 8 AWG, 800 kcmil, 900 kcmil, N/A
|
|
Diameter (Metric)
|
20.9 mm, 23.9 mm, 67.8 mm, 93.7 mm, 94 mm
|
|
Inner Diameter After Heat-Shrink
|
0.55 Inch, 0.67 Inch, 0.95 Inch, 1.27 Inch, 2.5 mm, 21.3 mm, 4.8 mm, 42.6 mm, 6.1 mm
|
|
Inner Diameter Before Heat-Shrink
|
0.56 Inch, 0.82 Inch, 1.18 Inch, 1.38 Inch, 1.94 Inch, 2.67 Inch, 3.69 Inch
|
|
Length
|
152 mm, 203 mm, 229 mm, 279 mm, 305 mm, 381 mm, 406 mm, 457 mm
|
|
Material
|
EPDM-rubber
|
|
Maximum Connector Length (metric)
|
127.0 mm, 177.8 mm, 203.2 mm, 279.4 mm, 304.8 mm, 355.6 mm, 50.8 mm, 76.2 mm
|
|
Maximum Wire Gauge
|
20.9mm², 67.8mm², 93.7mm²
|
|
Minimum Wire Gauge
|
10.1mm², 2.5mm², 32.2mm², 42.6mm²
|
|
Number of Conductors
|
1
|
|
Operating Temperature (Celsius)
|
-40 up to +90°C
|
|
Product Type
|
Cold shrinking, Splice
|
|
RoHS 2011/65/EU Compliant
|
Yes
|
|
RoHS EU Comments
|
RoHS 2011/65/EU compliant without exemption
*Important RoHS information |
|
Shielding Type
|
Non-shielded, Tape Shield, UniShield®, Wire Shield
|
|
Shrink Ratio
|
2:1
|
|
Size
|
125 - 200 mm², 14 - 16 mm², 152 mm, 300 - 400 mm², 35 - 50 mm², 500 mm², 6 - 50 mm², 630 - 1000 mm², 70 - 125 mm², Suited for cable size 300 - 400 mm²
|
|
Splice Type
|
Cold Shrink
|
|
Voltage Application
|
Low Voltage
|
Details
3M Cold Shrink Insulators offer a safe, easy to install method of insulating, sealing and protecting connectors, cable, hoses, fittings and conduit. The EPDM rubber insulators are supplied pre-stretched on a removable core. Removal of the core (unwinding) after positioning the splice
The live memory action of the specially formulated material provides a permanent, durable environmental seal and insulation, with an operating temperature range of -40⁰C to 90⁰C.
- Unique 3M Cold Shrink delivery system ensures fast, straightforward and consistent installation without compromising long term reliability.
- No special tools, heat or site permits are required to install Cold Shrink, making it well suited for in-field applications.
- Constant radial pressure for optimised environmental performance.
- No flame required means there is less chance of damamging the cable material.
- Seals tight, and retains its resiliency and pressure even after prolonged years of aging and exposure.
- Fast, straightforward installation.
Resources
Australia
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English
Australia - English
© 3M 2019. All Rights Reserved.