1. All 3M Products

Scotch-Brite™ Clean and Strip Disc

Products
  • Thin width gets into tight corners for complete cleaning, stripping, and surface prep
  • Provides greater surface area than wire brushes
  • Extra coarse grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
  • Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
 More...
Overall Diameter (Metric)
Overall_Diameter_Metric
Max RPM
Max_RPM
Products Available
 Overall Diameter (Metric)  Max RPM
All Models
Close
Specifications
Brand
Scotch-Brite™
Center Hole Diameter (Metric)
16 mm, 22 mm
Max RPM
1923, 1932
Mineral Type
Silicon Carbide
Overall Diameter (Metric)
100 mm, 125 mm, 15 mm, 178 mm
Product Form
Disc
Details

Scotch-Brite™ Clean and Strip Disc is an extra coarse grade, open-web disc engineered to effectively clean welds, remove rust and strip paint. The open construction and aggressive abrasive properties provide a smooth running wheel that resists loading when removing soft coatings.

The non-woven disc is a safe alternative to wire brushes, offers a greater surface area, and leaves a finer finish, which may eliminate the need for subsequent finishing steps.Scotch-Brite™ Clean and Strip Disc uses extra coarse silicon carbide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.Our Scotch-Brite™ industrial abrasives are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

  • Thin width gets into tight corners for complete cleaning, stripping, and surface prep
  • Provides greater surface area than wire brushes
  • Extra coarse grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
  • Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
  • Smear resistant, non-woven web material provides uniform wear over the life of the disc
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Australia - English