• Wash boat to remove dirt and grime with 3M Marine Multi-Purpose Boat Soap.
• Apply material to small area using a soft, clean cloth.
• Rub aggressively using straight, short strokes.
• Keep turning the cloth as more material is applied.
• Buff to a high gloss using a clean, soft cloth.

Note: For faster results use an electric drill (1000-2500 rpm) equipped with a 152mm 3M Marine Superbuff™ Pad (Part #09038).

MACHINE APPLICATION

• Apply sufficient material on a wool buffing pad (3M Pad Part N.05701 or 05711).
• Before starting machine, spread the material on a (50x50) cm area with the pad, this will avoid "throw out" of the material.
• Buff using light to medium pressure with your polisher (1500 to 2500 RPM).
• Reduce pressure when material starts to dry.

Note: Apply with an air or electric buffer (1500 to 2500 rpm) equipped with a 3M Superbuff™ Pad (Part No. 05701) or 3M Hookit™ SBS Compounding Pad.