• Wash boat to remove dirt and grime with 3M Marine Multi-Purpose Boat Soap.
• Apply polish sparingly to a small area using a clean, soft dry cloth.
• Rub aggressively.
• Keep turning the cloth as more material is applied.
• Buff to a high gloss using a clean, soft cloth.

Note: For faster results use an electric drill (1000-2500 rpm) equipped with a 152mm 3M Marine Superbuff™ Pad (Part #09038).

• Wash boat to remove dirt and grime with 3M Marine Multi-Purpose Boat Soap.
• Apply polish sparingly to boat surface to work a 60cm x 60cm area at a time.
• Before starting machine, spread the material around boat surface with buffing pad to reduce slinging.
• Reduce pressure when material starts to dry.

Note: Apply with an air or electric buffer (1500 to 2500 rpm) equipped with a 3M Superbuff™ Pad (Part No. 05701) or 3M Hookit™ SBS Compounding Pad.